本系列机床的特点:
l 该系列机床采用整体高刚性床身结构,通用化、模块化程度高,适用性广泛。机床标准配置采用GSK内/ 外圆磨床数控系统,具有性能稳定、操作简单、维修方便、精度控制高等特点。可实现定程切入磨削、量仪控制磨削(需选配测量装置)及砂轮自动修整、补偿等功能。
l 砂轮主轴采用套筒式动压主轴,具有回转精度高、刚性强,温升低。
l 砂轮架、工作台移动导轨采用硬轨结构、进口丝杆、大扭矩伺服电机,保证进给刚性和准确性。
l 头架主轴具有精度高、刚性强、卡磨零件表面圆度高等优点,并采用机械有级调速亦可实现变频无极调速。可配置进口或国产主动测量装置,实现磨削加工的全闭环控制。
l 尾架采用液压伸缩套筒结构。
l 适用于多台阶轴类零件端面、外圆批量精加工。
项目内容 | Item Contents | MKS1620Bx500 | MKS1632Bx500 |
工作台上最大回转直径(mm) | Max.grinding diameter on table | Φ240 | Φ360 |
两顶尖最大距离(mm) | Max. distance between two centers | 520 | 520 |
卡盘夹持承载重量(Kg) | Max.chuck load | 30(回转型头架) | 40(回转型头架) |
顶尖间最大承载重量(Kg) | Max.load between two centers | 50 | 130 |
外圆磨削范围(mm) | Max. external grinding diameter and length | (Φ5-Φ200)x500 | (Φ5-Φ320)x500 |
头架顶尖孔(Morse) | Spindle taper of headstock | MT.4 | MT.5 |
尾架顶尖孔(Morse) | Spindle taper of tailstock | MT.4 | MT.5 |
外圆砂轮尺寸(外径 x 宽 x 内孔)(mm) | External grinding wheel size | Φ600x80xΦ203 | Φ600x80xΦ203 |
砂轮架、工作台进给速度(x、y 轴)(mm/min) | Feeding speed of grinding wheel and table | 0.05-3000 | 0.05-3000 |
砂轮架进给角度(°) | Feeding angle of grinding wheel | 63° 26’ | 63° 26’ |
X、Y 轴最小设定单位(mm) | Min.setting unit ( X and Z axis ) | 0.001 | 0.001 |
砂轮主轴电机(KW) | Motor of grinding wheel spindle | 4 | 5.5 |
主轴转速(r/min) | Spindle speed | 1440 | 1440 |
头架主轴电机(KW) | Motor of headstock grinding spindle | 0.75 | 0.75 |
头架转速(r/min) | Motor speed of headstock grinding spindle | 63、125、250、500 | |
砂轮架进给电机(N.m) | Feeding motor of grinding wheel | 15(GSK) | 15(GSK) |
工作台进给电机(N.m) | Feeding motor of worktable | 7.5(GSK) | 7.5(GSK) |
总电源功率(KW) | Total drive capacity | 9 | 9 |
工作精度(mm) | Accurancy | 国家标准试件 | |
圆度(mm) | Roundness | 0.0015 | 0.0015 |
圆柱度(mm) | Cylindricity | 0.005 | 0.005 |
表面粗糙度(um) | Surface roughness | Ra ≤ 0.16 | Ra ≤ 0.16 |
机床净重(Kg) | Net weight/Gross weight | 3200 | 4300 |
机床尺寸(长 x 宽 x 高)(mm) | Packing dimension | 2700X2150X1800 | 3200X2000X1800 |
控制系统:标准配置广数GSK磨床系统 可选配置:新代 SLEMENS、FANUC